Date   : Tue, 03 Aug 2004 08:59:07 +0100 (BST)
From   : Pete Turnbull <pete@...>
Subject: Re: Acorn Winchester and dual hard drives?

On Aug 2, 22:23, Jules Richardson wrote:
>
> Hmm, my sick-sounding Winchester got me thinking. I've got some spare
> ST506 drives in storage which work. The Adaptec ACB4000 supports two
> drives in theory. So...
>
> a) Anyone know if they can be mixed capacity? I have a feeling the
> equivalent Omti board forces the drives to be identical if two are
used.

It's been a while, but the answer to that one is yes.

> b) Can the Acorn ADFS hard disk code handle talking to the Winchester
> board coupled to an Adaptec board with two drive (i.e. one SCSI
target,
> two LUNs)?

As far as I remmeber, yes, that's the normal way to do it.  ADFS can
handle 4 winchesters, and IIRC that's in the form of two Adaptecs with
two disks each.

> Just thinking that the quickest way to do a copy from the ailing
drive
> might be to do a direct backup/copy from one hard drive to another
> (working one) on the BBC itself. That'd buy me plenty of time to
figure
> out the best way of then getting all the data backed up to a PC.

Yes, that's almost certainly the fastest way, without esoteric
operations like connecting the Adaptec to a PC SCSI bus (which might be
problematic).


-- 
Pete						Peter Turnbull
						Network Manager
						University of York