<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>
Date   : Sat, 06 Aug 2005 11:40:02 +0200 (BST)
From   : Johan Heuseveldt <johan@...>
Subject: Re: ARM copros, speech cartridges, real time clocks, etc

Hi,

On Sat 06 Aug, Sprow wrote:
> 
> Hi again,
> This thread seems to have cooled off now, so I assume it's been

[snip]

> For reference, we had 
> 
> 1.Real time clock module
>   17%
> 2.ARM7 coprocessor board
>   44%
> 3.Speech cartridge for Master/Electron
>   6%
> 4.Second serial port
>   6%
> 5.DOSFS talking to GoMMC
>   27%

Private email must have informed you about my interests.

On the list I asked about possible input from us on the list on
the TUBE chip design. Haven't seen any comment on that. That would
keep the thread active/alive too! :-)

The topic was serious though; not for academic purposes.

My guess was/is that any design for the TUBE hardware in some kind
of CPLD, would leave quite a large unused area. 


greetings,
Johan


-- 
Johan Heuseveldt <johan@...              >
  aka  waarland

  The best place is a Riscy place
 
Do it today.... Tomorrow it will be illegal.






<< Previous Message Main Index Next Message >>
<< Previous Message in Thread This Month Next Message in Thread >>